New boiler
New boiler installation in Glasgow
A new boiler in Glasgow means choosing the right type and size for your home: usually a combi for a flat with one bathroom, a system boiler and cylinder for bigger homes. Replacing a gas boiler in an existing Scottish home is allowed. The work must be done by a Gas Safe registered engineer. Get a quote after a survey.

You need this when
- Your boiler is old and breaking down more often
- Parts for your boiler are hard to find
- You have an old back boiler or a floor standing boiler
- Your hot water cannot keep up with the household
- You are refitting a kitchen and want the boiler moved
- An engineer has said the boiler is unsafe to use
Combi, system or regular boiler
A combi boiler heats water as you use it, with no tank or cylinder. It suits most Glasgow flats and smaller houses with one bathroom and decent mains pressure, and it frees up the press cupboard where the old cylinder lived.
A system boiler heats a hot water cylinder. With an unvented cylinder you get mains pressure hot water to several taps at once, which suits family homes in Bearsden, Milngavie, Newton Mearns or Bishopbriggs with two or more bathrooms. A regular boiler, sometimes called heat only, works with a cold tank and vented cylinder and is still the right choice for some older homes. Our combi or system guide goes into more detail.
Flues, tenements and a proper installation
In a tenement flat, the flue route is often the deciding factor. A room sealed boiler with a balanced flue usually goes through an outside wall, and the flue terminal must keep clear distances from windows, doors and other openings. Where the kitchen is on the back wall of a tenement, that is often straightforward. Front elevations in conservation areas, internal kitchens and boilers moving rooms need more thought. A plume kit can redirect the steam away from windows or neighbours.
A new boiler works best on a clean system. Old Glasgow heating systems often carry black sludge from years of corrosion in radiators, so we clean the system and fit a magnetic filter to protect the new boiler. We set up controls that suit how you live, check the gas supply pipe is big enough for the new boiler, and make sure the condensate pipe is routed and insulated so it is less likely to freeze in a cold snap. You get the manufacturer's paperwork and the benchmark checklist, which records that the boiler was commissioned correctly.
The rules in Scotland
Gas work in Great Britain must be done by a Gas Safe registered engineer. Under schedule 3 of the Building (Scotland) Regulations 2004, work on a domestic gas boiler and its heating system does not usually need a building warrant, as long as the appliance is under 70 kW and no chimney or flue pipe work is involved, but it must still meet the building standards.
New buildings applying for a building warrant from 1 April 2024 must use clean heating under the New Build Heat Standard, so they cannot have gas boilers. Existing homes can still replace a gas boiler with a new gas boiler at the time of writing. The Scottish Government has consulted on a Heat in Buildings Bill, so check gov.scot for the latest position.
Grants and funding
Home Energy Scotland offers grant and interest free loan funding for clean heating such as heat pumps, with grant funding of up to £7,500 for eligible heating systems and an optional interest free loan on top, according to Home Energy Scotland. It is aimed at clean heating rather than like for like gas boiler swaps. Eligibility changes, so check with Home Energy Scotland directly. More in our Home Energy Scotland grant guide.
What affects the price
The price of a new boiler depends on the boiler type and output, whether it stays in the same place, the flue route, gas pipe size, system cleaning, controls, and whether a cylinder is added or removed. We give a fixed written quote after a survey.
| What | Price |
|---|---|
| Like for like combi swap in the same place | quote on survey |
| Moving the boiler or changing the flue route | quote on survey |
| Converting a system with a cylinder to a combi | quote on survey |
| System boiler and unvented cylinder | quote on survey |
No prices are shown on this site. Every job is priced after a look at it, by photo or a visit.
The visit
What happens, step by step
- 01
Survey
We look at the home, the hot water demand, the gas supply, the flue route and the condition of radiators and pipes.
- 02
Choose the system
We explain combi versus system or regular boiler for your home, with the reasons, and what size you need.
- 03
Written quote
You get a fixed written quote covering the boiler, flue, controls, system clean and any pipework changes.
- 04
Install
A Gas Safe registered engineer removes the old boiler, cleans the system, fits the new boiler and flue and commissions it.
- 05
Hand over
The manufacturer's warranty is registered and we show you the controls, the pressure gauge and how to top it up.
FAQ
New boiler: what people ask
Can I still get a new gas boiler in Scotland?
Yes, for an existing home, at the time of writing. New builds with warrants applied for from 1 April 2024 must use clean heating. Check gov.scot for any changes.
What size boiler do I need?
It depends on hot water demand for a combi, and the heat loss of the home for a system boiler. Bigger is not better. We size it at the survey.
Do I need a building warrant for a new boiler?
Usually not for a domestic gas boiler under 70 kW without chimney or flue pipe work, but it must meet the building standards and be fitted by a Gas Safe registered engineer.
Is there a grant for a new gas boiler in Scotland?
Home Energy Scotland funding is mainly for clean heating such as heat pumps. Check with them for what you may qualify for.
How long does a boiler swap take?
A like for like swap is often done in a day. Moving the boiler or changing from a cylinder system takes longer. We give you a timescale with the quote.
Where